Product Details

Ceramir CAD/CAM C- Blocks are highly chromatics blocks which correspond to shades A0, A1, A2 and A3. They reflect light and, after a short polishing, have a high gloss surface that resembles natural teeth. Ceramir CAD / CAM BLOCKS offer a unique combination of strength, flexibility and aesthetics and can be used for a wide range of indications, including crowns, inlays, onlays and veneers. They fit precisely onto titanium base (Ti-Base) or similar attachments so the final restoration can be placed in the same appointment saving time, money, and improves the patient’s experience. Due to the composition of the material, restorations made with Ceramir CAD/CAM BLOCKS can be easily repaired with composite in the mouth, if necessary. Ceramir CAD/CAM BLOCKS are a new type of CAD/CAM material. They are manufactured using advanced patented laser sintering technology, creating a single glass phase material embedded in a hybrid matrix. This results in that Ceramir CAD/CAM BLOCKS have the strength of particle infiltrated ceramics (lithium disilicate), the aesthetics comparable of feldspathic glass-ceramics, but without the brittleness of pure ceramics, and with the flexibility similar to dentin (20 GPa), which reduces tension during masticatory load and creates a shock-absorbing effect, decreasing occlusal stress. Ceramir CAD/CAM BLOCKS have a natural translucency due to their homogeneous glass-like structure. They reflect light and, after a short polishing, have a high gloss surface that resembles natural teeth. Ceramir CAD / CAM BLOCKS offer a unique combination of strength, flexibility and aesthetics and can be used for a wide range of indications, including crowns, inlays, onlays and veneers. The advantage with Ceramir CAD/CAM BLOCKs is that they can be milled to very thin margins while maintaining a high edge stability. A full crown will need a thickness of 1.5 mm in areas with cusps and occlusal contacts, while veneers can be milled down to as little as 0.3-0.5 mm with remained smooth edge providing as little gap formation as possible. Due to the composition of the material, restorations made with Ceramir CAD/CAM BLOCKS can be easily repaired with composite in the mouth, if necessary. Ceramir CAD/CAM BLOCKS have unique properties that allow shorter milling times compared to other CAD/CAM blocks. This reduces chairside time and saves money because the milling burs last longer. Ceramir CAD/CAM BLOCKS also eliminate the need for additional firing, saving even more time and equipment. 4 Reasons to use Ceramir® CAD/CAM BLOCKS 1. Strong & flexible 2. High aesthetic appearance 3. High edge stability 4. Cost effective & easy handling Advantages • Ultrafine sintered glass microstructure combines high strength with permanent high gloss • Shorter milling time and kinder to the milling burs • No additional firing required, simply polish and cement • Simple cementation procedure with proven perfect seal • Cost saving, faster processing time reduces chairside time • Biomechanical and Biocompatible • Esthetically superior, life-like appearance • Restoration can be easily fine-tuned or repaired by the dentist