#{title}

#101 Laboratory Handpiece

High quality lab handpiece designed to operate HP-sized instruments to 45,000 RPM without overheating. • Permanently sealed ball bearings promote quiet operation and never need lubrication • Convenient push-type chuck is tightened from back via knurled handle • True-running handpiece minimizes end play and generates smooth performance

#16 Laboratory Engine Short Arm

A high-performance bench engine/ belt-drive arm system that features a long history of dependable use. The unit provides high torque operation from a powerful, variable speed motor. 1/5 HP with reverse speed. Solid

32X Model Trimmer

A 12” [30cm] diameter Model Trimmer powered by a 1/3 HP ball bearing, capacitor start motor for those desiring lower pricing and lower torque. The swing-open front housing with full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover with utility tray, make this trimmer an excellent addition to the working laboratory.

Polishing Lathe 1/4 HP 2-Speed

(HP) Handpiece SPECIFICATIONS Frequency: 60.00 Hz Nameplate Output: .25/.06 Number of Poles: 2, 4 Phase: 1 Shaft Diameter: 0.376 IN Speed: 1725 rpm, 3450 rpm Voltage: 115 V

#1A Vibrator 120V

Improved 3-speed electronics and strong, dependable, performance make this most popular small vibrator. Durable 4” diameter rubber cover and suction cup feet improve stability and ensure quiet operation. Small size (4 ½” long x 4 ½” wide x 4 ½” high, 6 lbs.) fits conveniently in office labs.

#2 Vibrator 120V

Medium Size with High Powered Vibration Ribbed 6” diameter rubber-covered platform designed to hold larger flasks. Features a three-speed control switch for variable operation. Beige enameled housing (11” wide x 4 ½” deep x 6 ½” high, 13 lbs.) for stability and performance.

Sta-Vac Complete Unit

Dual-Stage vacuum motor provides powerful suction and highly accurate adaptations. Square center post for assured alignment over frame. 120 volt. External Dimensions: 7" W x 16" D x 11" H

Waxing Unit 115v

Adjustable temperature. Three compartments one measuring 2 ½" x 2 7/8" x 11/16" and two at 1 5/8" x 1 3/8" x 11/16". 115 volt.

Therm Bath 120V

• The Therm-Bath™ is an economical, thermostatically controlled warm-water bath • Use for any dental procedure where medium heat is required • Water temperatures at any setting in the range of 100° F - 170° F will be accurately maintained • Corrosion should not be a problem since the entire unit is constructed of 18-8 nickel-bearing stainless steel • The water receptacle is sealed below the rim so that accidental spillage is prevented from penetrating to the inside

87 Fishmouth Suction Cut Off

For use on the bench top to assist in the collection of grinding and polishing debris while connected to a dust collector.The fishmouth is a widemouthed type hood which directs debris created by lathe or handpiece operations into a dust collector. Manufactured of quality Resin which is impervious to germicides, the 87 is fitted with its own 3” [7.6cm] diameter suction cut-off.The fishmouth is contoured for use with a Lathe or a handpiece. Shipping Wgt.: 3 lbs [1.4 Kg] Unit Dimensions: 6 1/4” H x 12 3/4” D x 6 3/4” W [18cm x 30cm x 17cm]

84 Splash Hood Only

8" wide aluminum splash hood with insert pan and no light

Red Wing Lathe 1/4 HP Unit

(HP) Handpiece A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench. Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks. Chucks and accessories ordered separately. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding. 115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. Shipping Wgt.: 39 lbs [17.7 Kg] Unit Dimensions: 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm]

Centrifico Casting Machine

Casts all flasks up to 3-1/2" in diameter x 2-5/8" high. Complete with large and small clay crucibles, removable weights, universal tongs and accessories.

60U-D Dust Collector

Designed to provide suction to two work stations simultaneously. Powered by a ball bearing, capacitor start, industrial rated suction motor. 16" x 14" x 22".

220 Air Driven Handpiece Kit

350,000 rpm air turbine handpiece. Features a push rod for ejection of friction-held 1/16" diameter burs. Compact, lightweight design promotes ergonomic, comfortable easy to use operation.

#2 Big Boy Flask Press

A Heavy Duty Two Flask Press manufactured of malleable/ductile cast iron. With alloy steel shaft, grey iron handle and malleable/ductile iron pressure plate. Holes in frame allow for easy bench mounting, or 38A Clamps may be utilized for easy bench mounting and/or removal.

#31 Model Trimmer 10" 1/3 HP

10" diameter is ideal for in-office labs. Industrially rated ball bearing capacitor start motors. Easy door opening allows access to clean and change wheels.

Pro-Form Vibrator II Grey 110V

Features a steel spring construction, weighted aluminum base, a four-inch diameter rubber top, a three-speed control switch, and rubber suction feet.

Soldering Machine

Make repairs and additions instantly without the inconvenience, delay and danger of using a torch. Seven heat settings accommodate virtually every soldering need. Provides quick esthetic and functional repair that can save a costly remake. Quick heat has many advantages: • Solder clasps, bars and rests on the model without distortion • Repair partials without removing acrylic or teeth • Solder without investing joints • Fabricate and solder retainers, space maintainers and other orthodontic wire applicances • Repair pin holes in crowns • Solder precision attachments • Assemble and repair ceramic metal bridges

Extra Heavy Duty Vibrator Complete Unit 120v

Produces bubble-free models. Heavy duty lab model. 10½" x 7½" platform. Variable speed. #200. 120 volt.

Red Wing Lathe 1/4 HP Complete Unit

(HP) Handpiece Model 16B is the Chuk/Changer factory-installed to the right side of a 26A Low Base, Red Wing Lathe.This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds. The movement of the activating handle allows the technician to change from 1/4” [6.4mm] to 3/32” [2.4mm] burs, mandrels and chuck accessories without stopping the lathe.This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included. 115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. Shipping Wgt.: 41 lbs [18.6 Kg] Unit Dimensions: 18 1/4” L x 8” W x 7 3/4” H [45cm x 20cm x 19cm]

Adapter Red Wing

Super Quick Chuck Right Hand Side

Little Giant

A Flask Press manufactured for pressing a single flask. Constructed of malleable/ductile iron, the Little Giant will provide years of trouble free service under normal pressing procedures.