#{title}

Large .032" Ball Clasp SS Pack of 10

Size: (.8mm)

Red Rouge Bar 1lb

Red Rouge Polishing Compound is for high shine on gold, precious and non-precious alloys. Great for the final polish on gold.

PINDEX 100 Self Articulating Pins and Sleeves

Beauty-Cast Inlay Investment 50g Box of 24

America’s leading gypsum investment. • The proven standard for the Hygroscopic Technique • Can also be used for the High Heat Technique The Hygroscopic Technique with Beauty-Cast is as simple and quick as the High Heat Technique, but the results are much more uniform. The use of a water bath at 37.8ºC (100ºF) automatically brings all patterns to uniform temperature, softening the wax enough for even expansion of the investment. Combined, the wax expansion and the high hygroscopic expansion compensate for mos of the gold shrinkage and thus the low temperature burnout at 480ºC (900ºF) provides the balance of the required mold expansion. With the hygroscopic expansion of Beauty-Cast at 1.5% and thermal expansion at 0.55% at 480ºC, we unhesitatingly recommend the Hygroscopic Technique with Beauty-Cast as best suiting today’s needs for a precise yet simple routine technique. The inherent high thermal expansion of Beauty-Cast at 650ºC (1,200ºF) makes it possible to use the standard High Heat Technique. Setting expansion can be controlled by varying the number of ring liners in the Inlay Ring resulting in varying degrees of total expansion in Casting at 650ºC (1,200ºF) is necessary for the additional 1.2% for gold shrinkage. In the ADA Specification No. 2 for Investments, the term Type 1, Inlay Thermal refers to investments used by the High Heat Technique. With Beauty-Cast either technique will produce extremely smooth castings of a rich golden color that seldom require pickling.

Beauty-Cast Inlay Investment 50g Box of 144

America’s leading gypsum investment. • The proven standard for the Hygroscopic Technique • Can also be used for the High Heat Technique The Hygroscopic Technique with Beauty-Cast is as simple and quick as the High Heat Technique, but the results are much more uniform. The use of a water bath at 37.8ºC (100ºF) automatically brings all patterns to uniform temperature, softening the wax enough for even expansion of the investment. Combined, the wax expansion and the high hygroscopic expansion compensate for mos of the gold shrinkage and thus the low temperature burnout at 480ºC (900ºF) provides the balance of the required mold expansion. With the hygroscopic expansion of Beauty-Cast at 1.5% and thermal expansion at 0.55% at 480ºC, we unhesitatingly recommend the Hygroscopic Technique with Beauty-Cast as best suiting today’s needs for a precise yet simple routine technique. The inherent high thermal expansion of Beauty-Cast at 650ºC (1,200ºF) makes it possible to use the standard High Heat Technique. Setting expansion can be controlled by varying the number of ring liners in the Inlay Ring resulting in varying degrees of total expansion in Casting at 650ºC (1,200ºF) is necessary for the additional 1.2% for gold shrinkage. In the ADA Specification No. 2 for Investments, the term Type 1, Inlay Thermal refers to investments used by the High Heat Technique. With Beauty-Cast either technique will produce extremely smooth castings of a rich golden color that seldom require pickling.

#67-8 Left Bur Chuck 3/32"

Ball Clasps .028 Pack of 100

Ball Clasps .032 Pack of 100

Hi-Temp Casting Investment Powder Only 60g Box of 144

A special investment for non-precious and semi-precious alloys. Hi-Temp contains no carbon. Non-precious metal alloys require an investment specially compounded to: • Compensate for alloy shrinkage • Withstand high-fusing temperatures • Provide a non-contaminating atmosphere • Allow casting of a lighter-density metal Hi-Temp is the investment with these characteristics and more. It gives a smooth surface to the casting, flows readily and evenly for fine detail and sharp margins, and has high strength to prevent damage to the mold. The technique is simple. Special Liquid Concentrate is used instead of water. Control of expansion is obtained by dilution of the Special Liquid Concentrate with water — the greater the dilution, the less the expansion of the investment. Four parts liquid to one part water is the proportion suggested to get some frictional retention for full crowns on well-tapered preparation. Otherwise, the technique is essentially the same as handling any casting investment. The chart shows the various expansions of HI-TEMP at different concentrations of Special Liquid Concentrate. *Suggested concentration of Special Liquid Concentrate is 75% (3 parts liquid to 1 part water). *Recommended Liquid – Special Liquid Concentrate

Casting Ring 2 X 2

Keystone Casting Rings are made of a stainless steel. Even after facing repeat heat applications, they maintain fitting and stable in size. Features: - Stainless steel - High-Temperature resistant

Hi-Temp Casting Investment Powder Only 90g Box of 144

A special investment for non-precious and semi-precious alloys. Hi-Temp contains no carbon. Non-precious metal alloys require an investment specially compounded to: • Compensate for alloy shrinkage • Withstand high-fusing temperatures • Provide a non-contaminating atmosphere • Allow casting of a lighter-density metal Hi-Temp is the investment with these characteristics and more. It gives a smooth surface to the casting, flows readily and evenly for fine detail and sharp margins, and has high strength to prevent damage to the mold. The technique is simple. Special Liquid Concentrate is used instead of water. Control of expansion is obtained by dilution of the Special Liquid Concentrate with water — the greater the dilution, the less the expansion of the investment. Four parts liquid to one part water is the proportion suggested to get some frictional retention for full crowns on well-tapered preparation. Otherwise, the technique is essentially the same as handling any casting investment. The chart shows the various expansions of HI-TEMP at different concentrations of Special Liquid Concentrate. *Suggested concentration of Special Liquid Concentrate is 75% (3 parts liquid to 1 part water). *Recommended Liquid – Special Liquid Concentrate

#67-9 Arbor Chuck

Left or Right

Shure Shine Polish Bar 2.5lb

Shure-Shine Plate Polish use to polish acrylic denture materials. Tan color.

Zirc Wall Strip Lab Pan

Our Wall Strips allows you to get the most out of the Wall-Hanging Lab Pan. It holds three pans and makes it easy to utilize the helpful wall-hanging feature without needing to install expensive shelving. Features: -Pre-drilled holes -Holds 3 Lab Pans Cleaning, Care, Maintenance: -Surface disinfect only Dimensions: 18"" What's included? (1) Hanging Strip Mounting hardware

Kisag Burner with Refill

Height: 3 1/4" Diameter: 3 1/2" (regulating knob extends 1 1/2") Weight: 14 oz. Small, convenient, simple, and light in weight. Design is such that accidental tipping is virtually eliminated. Protecting hood will not overheat and therefore may be used as a finger rest. Highest quality workmanship and material throughout. Packaged securely for safe transportation with initial supply of gas and one refill container.

Bur Chuck-Brass 5/32" Capacity

5/32" capacity for right side of motor. Brass body with steel knurl. For standard dental taper polishing motors.

#10A Bunsen Burner Nat Gas

Cristobalite Investment for Low Fusing C&B Alloy 50g Box of 144

The principal ingredient, Cristobalite, gives high thermal expansion, even at comparatively low temperatures. It is possible to use the same creamy mix by simple standard vacuum or painting techniques for all types of inlays. The usual Whip Mix care in compounding and control assure a uniform water/powder ratio and consequent uniform expansion.

Ring Liner 1-1/8" Wide

This material has the necessary cushioning and the correct water absorption, which enables the investment to control setting expansion. During burnout it chars to a black ash which crumbles easily when the mold is pushed out of the ring. Liners should be 3mm (1/8″) short of each end of the casting ring.

Casting Ring 2-1/2 X 2

Keystone Casting Rings are made of a stainless steel. Even after facing repeat heat applications, they maintain fitting and stable in size. Features: - Stainless steel - High-Temperature resistant

Special Investment Liquid 340ml

For use with Cera-Fina, Ceramigold, Hi-Temp, and X-20 Chrome.

Special Liquid Concentrate Quart

For use with Cera-Fina, Ceramigold, Hi-Temp, and X-20 Chrome.

Articulator Apex #2 Chrome 50

Width at the joint is 1 3/4" (45 mm) with a vertical parallel height of 2 1/8" (54 mm) and condylar inclination of 25°. The small size of this articulator allows the versatility to use for full or partial work and it is very comfortable to hold in one hand. 50 and 50A feature identical dimensions. 50 is die cast and chrome plated, while #50A is constructed of solid brass. Apex #2 #50 Chrome

Cera-Fina Investment Powder 90g Case of 144

Cera-Fina is a carbon-free phosphate investment developed for professionals who demand a more finely grained investment. It is designed for use with all classes of casting alloys: precious, semiprecious, and non-precious. Features: • Extremely fine texture results in accurate castings with very smooth surfaces • Extended working time, as much as 10 minutes, allows the investing of multiple flasks • Absence of carbon assures compatibility with all casting alloys, especially Palladium and non-precious • Increased liquid to powder ratio yields a creamier mix and allows better flow, resulting in bubble-free castings *Suggested concentration of Special Liquid Concentrate is 75% (3 parts liquid to 1 part water).