#{title}

Deluxe 12" Orthodontic Model Trimmer with Accessories 115V 1/2HP

Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts. Available in a 10″ or 12″ size, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use. The 12″ model features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm). *Accessories Include: Orthodontic Work Table & Coarse Abrasive Wheel, Electric Water Valve, Water Spray Attachement and Splash Shield

12" Model Trimmer with Accessories

Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts. Available in a 10″ or 12″ size, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use. The 12″ model features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm). *Accessories Include: Fully Adjustable Work Table & Coarse Abrasive Wheel.

WH41 Wax Heater with Thermostat Control

Thermostat control with temperature adjustments from 100°F through 250°F Ray Foster Electric Wax Heaters feature three compartments, with two measuring 2-1/8” X 1-3/4” X ” deep, and one 2-1/4” X 3-3/4” X ” deep. They have a hinged lid to keep out contaminants, indicator lights, and an ON/OFF switch. Rugged construction and reliable components promise years of trouble free service.

#6380 Bench Stand White

For use with the Whip Mix Vacuum Power Mixer Plus and Combination Unit.

Deluxe 12" Model Trimmer 115V/60Hz 1/2HP with Accessories

Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts. Available in a 10″ or 12″ size, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use. The 12″ model features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm). *Accessories Include: Fully Adjustable Work Table & Coarse Abrasive Wheel, Electric Water Valve, Water Spray Attachement and Splash Shield.

Diamond Deluxe 12" Model Trimmer

Quality crafted, easy-to-use Whip Mix model trimmers provide excellent cutting action to produce consistently attractive casts. Available in a 10″ or 12″ size, all units are constructed of rigid cast aluminum housings and backing plate, and are shipped completely assembled for immediate use. The 12″ model features a fully adjustable work table with angle ranges from 85 degrees to 120 degrees from the grinding wheel surface. A hinged front cover, held by a single wing nut, allows easy access to change or reverse the abrasive wheel. A full radius water supply provides effective abrasive surface cleaning, while removable clean-out plugs provide access for general cleaning. Unit measures 16″ wide x 17″ high x 15″ deep and comes with a coarse abrasive wheel (40.5 cm x 43 cm x 38 cm). *Accessories Include: Fully Adjustable Work Table & Blue Wonder Diamond Wheel, Electric Water Valve, Water Spray Attachement and Splash Shield

Tech2000 35k RPM Lab Handpiece Only

Twist type chuck release Improved dust seal protection Includes 3/32” chuck Multi-chuck feature (easy to change chuck) Optional chuck sizes available: 1/8”, 1/16”, or 3MM

Vulcan® Multi-Stage Programmable Furnace 3-550 120V

These benchtop furnaces feature a 3-step multi-stage programmable system for management of time, temperature and rate. Three-step program can be linked for six-stage operation and up to seven-day delay start.

Air Vac XQ

Extra quiet. Utilizes compressed air supply. Weighs only 10 pounds. Precise single push button control. Oversized processing handles.

Steam Cleaner 220v

Your Grobet steamer is a hand-filled 2.2 gallon boiler designed to operate at 75 Lbs pressure. It has an ASME certified steam vessel, is electrically heated, and controlled through the use of hand and electrically operated valves. It has a low-water cutout feature in accordance with applicable fire codes. The unit produces a flow of steam for cleaning small items such as jewelry when a solenoid valve is actuated by a foot pedal. The unit is safe when installed, maintained, and used in accordance with these instructions. Your Grobet steamer comes standard with an enclosed cabinet, pressure gauge and pressure gauge isolation valve, solenoid steam valve with backup manual valve, fill funnel and tube with manual valve and automatic check valve, temperature control, blow down/drain valve, preset pressure relief valve, water level sight gauge with isolation valves, control indicator lights, and foot pedal control switch. Features: •External sight glass and protective cover, with ball check valves •Water intake valve with back up flow prevention •Stainless steel heating element for reduced sediment in vessel •Adjustable thermostat; Insulated nozzle assembly •Low water cutoff •Quick recovery •Easy to plumb to meet local standards.

Vulcan® PD Power Door Furnace 3-550 100V/120V

The Vulcan 3-550 PD (power door) furnace is equipped with a foot switch for automatic door opening and time-delay closing. The foot control can also be wall or bench mounted.

32 Hi-Torque Model Trimmer 12" 3/4 HP with Diamond Wheel

1:1 Micromotor with SAMC or AMC or LAMC

Removable autoclavable motor casing

Vulcan® Multi-Stage Programmable Furnace 3-1750 230V

These benchtop furnaces feature a 3-step multi-stage programmable system for management of time, temperature and rate. Three-step program can be linked for six-stage operation and up to seven-day delay start.

Vulcan® Programmable Air Exchange Furnace 3-550A 230V

These models offer faster, cleaner burnout than traditional furnaces. Pre-heated air is drawn through the chamber and subsequently removed with an internal Ventrui exhaust system. The degree of interior air circulation can be programmed for different program stages.

Vacumat 6000 M Firing Unit

The following additional items are required for furnace function. Please add accessories to order: 5456-713 - Vita Vpad Excellence 4282-331 - VITA Vacuum Pump 110V

Miditherm 200 MP Furnace 220V

• The right preheating furnace in the right size for every requirement • Monitoring of the temperature using a microprocessor in combination with a precision thermocouple ensures that there are no miscasts due to the casting rings being at the incorrect temperature • Four-zone heating, with a max. temperature of 1,100 °C, guarantees uniform heating of the casting rings and consistent results during casting • The heating elements are embedded in robust industrial ceramic – for increased reliability and a long service life • Maximum capacity of the mould chamber: 32 × size 3 mould 9 × BEGO large mould former, blue • Flexible programming with 4 programmable holding stages per programme, infinitely variable selection of the heat rate from 1–9 °C/Min and 1 speed programme reliably covers all applications in CoCr and crown and bridge work TECHNICAL DATA Nominal voltage: 200-240 VAC, 50/60 Hz Product description: Preheating furnace for crowns, bridges and partial dentures Depth: 550 mm Width: 470 mm Height: 600 mm Content/amount: 1 piece Net weigth: 56 kg Muffle space: 200 x 110 x250 mm Temperature: 1150 °C

Rotary Tool Kit

No Load RPM: 5,000 - 35,000 Amps @ 120V: 1.6 Bearings: Ball And Roller Handle Type: Comfort Grip Area Straight Handle Includes: Planer, Lawn Mower And Garden Tool Sharpening And Flex Shaft Attachment, Circle Cutter/Straight Edge And Sanding/Grinding Guide, Detail Nose Piece, Engraving Cutter, Drill And Cutting Bit, 2 High Speed Cutters, 2 Mandrels, Bristle Brush, 2 Sanding Drums, 4 Sanding Bands, 6 Sanding Discs, 4 Felt Wheels, 11 Cut-off Wheels, Polishing Compound, Carbon Steel Brush, 3/32" Collet, 3 Grinding Stones, Polishing Wheels, 6 Cut-Off Wheels, 3 Abrasive Buffs, Wrench, Plastic Carrying Case

Air Vac XQ 220V

Mizzy Air Vac XQ Don’t let the size of the Mizzy Air Vac XQ misguide you. The powerful pressure unit provides superior adaptation for dental plastics using laboratory or operatory internal air compressors. Because the unit has no motor, it is compact and very quiet. Also, the vacuum pressure from an office compressor is usually greater than the pressure generated from smaller vacuum units. The greater the pressure, the better definition and adherence the dental appliances will have. Features: - Can be used to layer appliances - Very economical when compared to its European counterparts - Uses 5”x5” resin sheets or round resin sheets - Available in 110 Volt and 220 Volt - Symmetrical heating system - Lightweight, rust-free aluminum frame - Made in the U.S.A. - 5-year warranty on parts and labor

Bofa Hepa Vacuum

Dimensions (HxWxD) 25.7 x 17.3 x 15.5 " Weight 75lbs Electrical Data 115-230v 1ph 50/60Hz Full Load Current 12.5 amps/ 1.1kw This vacuum/air filtration unit is compatible with DWX-51D, DWX-4, DWX-50 dental milling units. The unit works silently and features a brushless motor for continuous use with a MTBF of 30,000 hours.

AutoPilot Deluxe for 2 Micromotors and 2 Air Handpieces Micromotor

• Coordinates dust collection control, for a 10A or less unit, from up to 2 Micromotors or lathes totaling 5A • Micromotor or lathe automatically turns on dust collector • Built-in “Dust Delay Time” allows dust collector to remain on for a few seconds to clear dust in the air after micromotor or lathe stops

Smartwax Duo US

7000CD Dental Lab Steamer with 3000DA steam Gun and 9 Liter Capacity

The 7000CD produces 70 PSI of steam pressure and reaches temperatures up to 221º F at the tip. It’s ideally suited for use in dental labs for cleaning away left over wax, plaster waste and other debris, and for polishing the final product FEATURES • Reset thermostat • 4 safety systems • Pressure gauge • Incoloy heating elements • Blow down valve • 30-40 minute heat up time • Up to 8 hours of continuous steam

1:2 Straight Handpiece